|
Power Supply |
DC12V input jack with plug attached |
Standby Current |
20mA |
Operating Current |
60mA |
Trigger Input method |
1.Two zones N.C. input (instant or delay) 2.Voltage trigger |
Exit delay |
Instant or 120 seconds |
Entry Delay |
Instant or 30 seconds |
Mode button |
1. Programming mode-program telephone and voice recording 2. Test mode-telephone number and voice playback 3. Operation mode-Armed |
Voice message |
10 second for each zone input, total 20 seconds |
Number of telephone Stored |
Up to 4 |
Telephone format |
Accept both tone and pulse |
Telephone system |
Accept both single or PABX system |
Max Digit per tel number |
32 digits |
Dialing method |
1. To dial 2 times for each answered telephone and redial up to 8 times for each busy or unanswered telephone whether the alarm is reset or not. 2. Stop dialing upon alarm reset. |
Siren Output |
Output jack with plug attached |
Microphone |
Built-in microphone |
LCD Indication |
To show status and test telephone number |
Speaker |
Built in speaker for testing and playback of voice message |
Data Memory |
No volt memory IC |
Back Up |
9V back up battery can be added to ensure operation under power failure |
Operating Temperature |
-20 to 500 C |
Case |
Ivory ABS plastic |
Weight |
260 g |
Dimension WxHxD |
146x101x38 mm |